Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

Esterification of Oleic Acid to Produce Biodiesel over 12-Tungstophosphoric Acid Anchored Two-dimensional Zeolite

Biodiesel has emerged as a non-toxic, biodegradable, and renewable fuel substitute that can be readily produced via the esterification reaction of free fatty acids. The present work explores the potential of 12-tungstophosphoric acid(TPA) anchored two-dimensional(2D) ITQ-2 zeolite(TPA/ITQ-2) as heterogeneous acid catalysts for biodiesel production. TPA/ITQ-2 material was prepared by swelling, delamination, and subsequent wetness incipient impregnation approach. The prepared catalysts were comprehensively characterized by powder X-ray diffraction, N₂ adsorption/desorption, temperature-programmed desorption of ammonia, flou-rier transform infrared spectroscopy, and transmission electron microscopy. The catalytic activity of TPA/ITQ-2 for biodiesel production was evaluated by the esterification reaction of oleate acid with methanol. Process parameters, such as reactant molar ratio and TPA loading were optimized. Due to the superior mass transfer and adequate stable acid sites, 2D TPA/ITQ-2 showed a higher catalytic activity and a better recyclable stability than the 3D and layered TPA/zeolites. This work will provide new opportunities for the design of 2D zeolite-based acid catalysts for biodiesel production.     

Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

An easy and delicate approach using cheap carbon source as conductive materials to construct 3D sequential porous structural Na3V2(PO4)3/C(NVP/C)with high performance for cathode materials of sodium ion battery is highly desired.In this paper,the NVP/C with 3D sequential porous structure is constructed by a delicate approach named as“cooking porridge”including evaporation and calcination stages.Especially,during evaporation,the viscosity of NVP/C precursor is optimized by controlling the adding quantity of citric acid,thus leading to a 3D sequential porous structure with a high specific surface area.Furthermore,the NVP/C with a 3D sequential porous structure enables the electrolyte to interior easily,providing more active sites for redox reaction and shortening the diffusion path of electron and sodium ion.Therefore,benefited from its unique structure,as cathode material of sodium ion batteries,the 3D sequential porous structural NVP/C exhibits high specific capacities(115.7,88.9 and 74.4 mA·h/g at current rates of 1,20 and 50 C,respectively)and excellent cycling stability(107.5 and 80.4 mA·h/g are remained at a current density of 1 C after 500 cycles and at a current density of 20 C after 2200 cycles,respectively).     

Electrospun Aspirin/Eudragit/Lipid Hybrid Nanofibers for Colon-targeted Delivery Using an Energy-saving Process

Both electrospinning apparatus and their commercial pro-ducts are extending their applications in a wide variety of fields. However, very limited reports can be found about how to implement an energy-saving process and in turn to reduce the production cost. In this paper, a brand-new type of coaxial spinneret with a solid core and its electrospinning methods are developed. A novel sort of medicated Eudragit/lipid hybrid nanofibers are gene-rated for providing a colon-targeted sustained release of aspirin. A series of characterizations demonstrates that the as-prepared hybrid nanofibers have a fine linear morphology with the aspirin/lipid separated from the matrix Eudragit to form many tiny islands. In vitro dissolution tests exhibit that the hybrid nanofibers are able to effectively prevent the release of aspirin under an acid condition (8.7%±3.4% for the first two hours), whereas prolong the drug release time period under a neutral condition(99.7±4.2% at the se-venth hour). The energy-saving mechanism is discussed in detail. The prepared aspirin-loaded hybrid nanofibers can be further transferred into an oral dosage form for potential application in counte-ring COVID-19 in the future.     

Organic Nanocrystals Based on a Solid-emission-tunable AIEgen for Cell Imaging

The development of fluorescent nanocrystals based on organic small molecules is of great importance in bioimaging due to the merits of easy modification,high brightness and excellent photostability,however suffering from the emission-detrimental aggregation-caused quenching(ACQ)effect.Herein,we successfully designed and synthesized an AIE-active di(N,N-dimethylaniline)-dibenzofulvene(named as NFTPE),which exhibits the crystallization-induced emission enhancement(CIEE)effect.Interestingly,two types of yellow-and orange-emissive crystals for NFTPE were obtained,exhibiting aggregation microenvironment-dependent emission tuning in the solid state.Single-crystal analysis and density functional theory(DFT)calculations reveal that different aggregation microenvironments result in the distinct molecular conformation for various emission.Excitingly,the crystallization of NFTPE in an aqueous solution under the assistance of amphiphilic PEG polymer matrices could be monitored in situ by the fluorescence changes,facilitating the preparation of NFTPE nanocrystals(NFTPE-NCs)by adjusting the aggregation microenvironment.The obtained NFTPE-NCs exhibit the superior performance in cell imaging in respect to high brightness,photostability,and biocompatibility,thus demonstrating the potential in bioimaging applications.     

同位素稀释-高分辨气相色谱/高分辨质谱测定大气中有机氯农药

建立了测定大气中25种有机氯农药(OCPs)的同位素稀释-高分辨气相色谱/高分辨质谱法(ID-HRGC/HRMS)。样品用正己烷/二氯甲烷(1∶1, v/v)进行加速溶剂萃取(ASE)。通过柱洗脱实验、单柱和组合柱净化实验,最终确定样品的净化方案为弗罗里硅土固相萃取柱和石墨化炭黑固相萃取柱组合净化。样品萃取液净化后进行HRGC/HRMS分析。采用平均相对响应因子(RRF)法对样品中目标物进行定量,6点校准溶液RRF的相对标准偏差(RSD)均≤20%。线性范围为0.4~800 μg/L,相关系数R²均>0.992。对空白样品依次进行100 pg、400 pg和15 ng水平下的加标试验,各添加水平下OCPs测定值的RSD为0.64%~16%,加标回收率为67.2%~135%。穿透试验表明,滤膜+聚氨酯泡沫/聚氨酯泡沫作为吸附介质的大体积主动大气采样器(AAS)在采集环境空气时,五氯苯极易发生穿透,有效采样模式待进一步研究。在上述采样模式下,六氯苯的有效采样体积较小,标准状态(101.325 kPa, 273 K)采样体积应≤30 m³,其他OCPs应≤1200 m³。以上述体积计算,25种目标化合物的检出限为0.002~0.7 pg/m³。对北京环境空气样品分析测定,结果显示除反式-环氧七氯、异狄氏剂、顺式-九氯和4,4'-滴滴滴在部分样品中未检出外,其他OCPs均为100%检出;六氯苯浓度在514~563 pg/m³之间,其他OCPs的浓度在0.01~18.9 pg/m³之间;替代标回收率为33.9%~155%。由于现有相关监测标准的仪器灵敏度较低、方法检出限较高,已无法满足目前空气中痕量OCPs的测定需求,因此亟待修订新的高灵敏度监测方法标准。该方法适用于目前大气中OCPs的超痕量水平分析,为新标准的制订奠定基础,也为国家履行相关国际公约提供有力技术指导。     

基于非靶向代谢组学的茄梨和红茄梨成熟期果皮代谢产物的差异分析

为了探究西洋梨品种茄梨及其红色芽变红茄梨成熟期果皮代谢产物差异,采用超高效液相色谱-质谱联用技术,对茄梨和红茄梨成熟期果皮进行非靶向代谢组学研究。通过主成分分析和正交偏最小二乘判别分析,构建了多变量统计分析模型,结合模型和变量重要性投影与最大差异倍数值,基于精确质量数、二级碎片以及同位素分布,使用PMDB(Plant Metabolome Database)数据库进行定性,筛选并鉴定出茄梨和红茄梨果皮中显著性变化(P<0.05, VIP(variable importance in project)≥1)的差异代谢物有83种,主要包括酚酸类、黄酮类和氨基酸类物质,涉及类黄酮代谢、氨基酸代谢、苯丙烷类代谢等代谢途径,其中53种物质含量上调,30种物质表达下调。通过KEGG(Kyoto Encyclopedia of Genes and Genomes)数据库进一步对差异代谢物质进行通路富集分析,差异代谢物主要分布在20条代谢途径中,P<0.05的代谢途径有6条,分别是类黄酮生物合成、黄酮和黄酮醇生物合成、苯丙烷生物合成、丁酸酯代谢、苯丙氨酸代谢、酪氨酸代谢。这些差异代谢物的变化可能是导致茄梨和红茄梨果皮色泽不同的原因。该研究从植物代谢组学角度初步揭示了茄梨和红茄梨成熟期果皮的代谢产物差异性。     

微流控纸芯片在环境分析检测中的应用

近年来,微流控纸芯片由于低成本、便携化、检测快等优点,在需要快速检测的环境分析领域中展现出了巨大的应用前景。该综述从微流控纸芯片在环境分析中的应用角度,总结归纳了微流控纸芯片在环境分析中的最新研究进展,并展望了其在未来的发展趋势与挑战。论文内容引用150余篇源于科学引文索引(SCI)与中文核心期刊中的相关论文。该综述包括微流控纸芯片在环境检测中的优势与制造方法介绍;电化学法、荧光法、比色法、表面增强拉曼法、集成传感法等基于纸芯片的先进分析方法介绍;根据环境分析目标物种类,如重金属离子、营养盐、农药、微生物、抗生素以及其他污染物等,对纸芯片的最新应用现状进行了举例评述;基于微流控纸芯片的环境分析研究的未来发展趋势和前景展望。通过综述近期相关研究,表明微流控纸芯片从提出至今虽然只有十几年的发展历程,但其在环境分析研究中的发展却十分迅速。微流控纸芯片可以根据不同的环境条件和检测要求灵活选择制作与分析方法,实现最佳的检测效果。但是微流控纸芯片也面临一些挑战,如纸张机械强度不足、流体控制程度不佳等问题。这些问题指出了微流控纸芯片在环境检测领域的发展趋势,相信随着不断深入的研究,纸芯片将会在未来的环境分析中发挥更大作用。     

常见鼠药中毒及检测技术研究进展

鼠药是控制有害啮齿类动物最经济有效的方式,而大多数鼠药对人畜均具有较强的毒性。鼠药的不合理使用严重威胁人类和其他非靶标动物的生命安全。由误食、二次中毒、自杀及恶意投毒等原因导致的中毒事件时有发生。发展快速准确的鼠药中毒检测技术对于及时确定中毒靶标从而进行有效干预、对症治疗是降低鼠药危害的重要手段。常规的鼠药检测大多基于液相色谱-串联质谱等仪器分析方法。近年来,免疫分析技术由于具有操作简单、快速的优点,开始用于鼠药的快速检测。该文重点针对典型的氟乙酰胺、毒鼠强和抗凝血类鼠药的中毒概况和检测技术进行了总结,以期为相关领域研究人员提供技术指导。     

运用综合手段研究铅锌硫化物精矿的氧化和鉴定其产物

南京关口每年从国外进口铅、锌精矿达几百万吨,随着我国国民经济的发展,作为重要有色金属来源的该矿种的进口量仍将逐年增加。硫化物精矿在运输和储存过程中都有可能发生氧化,由此导致金属品位的波动是常见现象,然而此前在这方面的报导甚少。为此,作者以铅锌硫化物精矿为例对其进行了模拟状态下的氧化实验并采用能谱、光学显微镜、化学物相分析、X射线衍射分析、扫描电镜等手段对氧化前及氧化后的样品进行了鉴定。结果表明,在模拟精矿储运条件下两种精矿的氧化皆甚为明显,铅精矿为1.5%,而锌精矿达到了14.5%,由此引起的品位变化是不可忽视的。鉴于有色金属硫化物精矿在储运过程中呈现了它们的易氧化性并对品位产生影响,所以有关这类矿产品的商贸过程中涉及取样、样品加工和保管、公证等问题,均应在科学实验基础上规范化。